Hager 009081 4501 CLB 36" X 84" US26D QC RX REV 3 Satin Chrome

RATINGS – EXITS

STANDARD – NON-FIRE RATED

End Caps

• Standard end cap (zinc)
• OPTIONAL Flush end cap (zinc)

DOOR HEIGHT in. – EXIT DEVICE

84

MISC. – EXITS

US26D – SATIN CHROMIUM

FINISHES – EXITS

US26D – SATIN CHROMIUM

ACCESSORIES – EXITS

QUICK CONNECT

ELECTRICS – EXITS

REQUEST TO EXIT

Cover Tube

Aluminum

DOOR WIDTH in. – EXIT DEVICE

36

Latchbolt Type

• Top – 1/2″ (13mm) throw, Pullman type with automatic dead-latching, stainless steel
• Bottom – 1/2″ (13mm) throw, Pullman type, held retracted during door swing, stainless steel

Stile Width

• 4″ (102mm) minimum stile width required
• All stile widths are measured from door edge

Fasteners

• Wood and machine screws
• Thru-bolts

Door Thickness

1-3/4″ (44mm) – Standard

Trim

• Archer, August, Charles, Johnston, Joshua, Louis, Warren, William or Withnell lever with escutcheon trim
• Pull plate trim (excluding 45PT)
• Rim cylinder x optional pull

Cover

Stainless steel, zinc

Maximum Door Height

• 7′ (2134mm) – Standard
• 8′ (2438mm) – Optional
• 10′ (3048mm) – Optional (panic device only)

Projection

• 3″ (76mm) in undogged position
• 2-5/8″ (67mm) in dogged position

Product Overview Grade 1 Concealed Vertical Rod Exit Device, Less Bottom Rod
Functions:
01 – Exit Only (device)
Applications:

• Heavy duty commercial
• NOT recommended for single-rabbet double egress frames
• NOT recommended for doors with inset greater than 1/8″

Notes:

• Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
• Recommended to be used on appropriately reinforced doors
• NOT recommended for doors with inset greater than 1/8″, ex. double egress frames or jamb depths over 5-3/4″ or greater
• A spring loaded fire bolt 2-649-0166 must be used on fire-rated LBR devices used on a pair of doors to ensure the device’s fire rating

Certifications:

• ANSI/BHMA A156.3-2014 Grade 1
• UL305 Listed for Panic Hardware
• UL/cUL Listed for up to 3 hours for “A” labeled doors up to 10′ in height
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Complies with ANSI A117.1 for accessible buildings and facilities

Finishes:

• US3, US4, US10B, US26, US26D, US32D, BLK
• Trim not available in US32D

Warranty:
Lifetime
Notes:

• Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
• Recommended to be used on appropriately reinforced doors
• NOT recommended for doors with inset greater than 1/8″, ex. double egress frames or jamb depths over 5-3/4″ or greater
• A spring loaded fire bolt 2-649-0166 must be used on fire-rated LBR devices used on a pair of doors to ensure the device’s fire rating

Rod Length:

• Rods for 7′ (2134mm) door – Standard
• Rods for 8′ (2438mm) and 10′ (3048mm) doors – Optional
• Door height of 7′ (2134 mm) requires 34-5/8″ (879 mm) top rod length
• Door height of 8′ (2438mm) requires 46-5/8″ (1184mm) top rod length
• Extension rod kits available 2′ (610mm) or 3′ (914mm)

Strikes:

• Stainless steel with plated rollers included standard with panic devices
• Solid stainless steel included standard with fire rated devices
• Top strike mortised into frame
• Double door strike for use with CVR and RIM device available

Dogging:

• Hex key dogging standard on panic rated devices
• Cylinder dogging available on panic rated devices – specify “CD”. 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8″ (29mm) – 1-3/8″ (35mm) is required.

Door Width:

• 36″ (914 mm) field sizeable to 30″ (762mm) panic-rated door and 28″ (711mm) fire-rated door
• 48″ (1219 mm) field sizeable to 36″ (914mm) panic- or fire-rated door
• Reference electrified exit device for door width specifications