GoWesty Front Coil Springs [4WD Syncro Vanagon]Zero Lift

Onepair of GoWesty-designed dual-ratefront coil springs for your 4WD (Syncro) Vanagon.

These springs are an exclusive GoWesty design. They are made right here in America by a leading automotive spring manufacturer that supplies many aftermarket companies. They feature an ultra-modern, hot wound (just like the OEM springs), dual-rate design based on the manufacturer’s knowledge and our personal R&D over the past decade. They may look unusual, but they work. For the complete story on these springs, and a thorough explanation as to why they are the way to go, click here. Please click here for an informative response to the oft-asked question, “If I add lifting springs, do I have to install a longer shock?””

Now you have a decision to make: Do you choose the ZERO lift springs or the 2″ lift springs?

ZERO LIFT: These are designed as a direct replacement for all 1986-91 Vanagon 4WD (Syncro) Westfalia campers, and will maintain your factory ride height. If you have the much lighter hard-top Vanagon (or single/double cab truck), you will see a slight suspension lift of up to 1.5″. If you have an engine conversion that has a different weight or weight distributionsomething other than the Vanagon water-boxer engineyour Vanagon may not sit level. These springs are NOT designed to compensate for Vanagons with engine conversions. If you need additional leveling, we offer spring pads.This spring set DOES NOT INCLUDE our billet aluminumUpper Ball Joint Spacer Kit.

2″ LIFT: These springs will provide roughly a 2″ suspension lift for all 1986-91 Vanagon 4WD (Syncro) Westfalia campers. If you have the much lighter hard-top Vanagon (or single/double cab truck), these springs will provide too much lift for your suspension geometry. Don’t say we didn’t warn you! If you have an engine conversion that has a different weight or weight distributionsomething other than the Vanagon water-boxer engineyour Vanagon may not sit level. These springs are NOT designed to compensate for Vanagons with engine conversions. If you need additional leveling, we offer spring pads. This lifting spring set requires either our our billet aluminumUpper Ball Joint Spacer Kit or our Long-Pin Adjustable Upper Ball Joints for correct suspension geometry.DO NOT USE 2″ FRONT SPRINGS WITH FOX SHOCKS.

Installation & Fitment Notes

INSTALLATION NOTES:Does not require special tools to install. However, the installation of these springs is very difficult, even with a car hoist and all the correct tools. and requires a 4-wheel alignment after installation. GoWesty recommends that a professional shop with alignment tools install these springs.DO NOT USE 2″ FRONT SPRINGS WITH FOX SHOCKS.

ADDITIONAL NOTES FOR LIFTING SPRINGS: If you have installed lifting springs (as opposed to our zero-lift springs), you must also install ourUpper Ball Joint Spacer Kit or our Long-Pin Adjustable Upper Ball Jointsand will need to have the front end re-aligned.It is important to note that our lifting springs will raise your Vanagon to its suspension limitwhich means these springs are designed to get your vehicle as high as possible while still maintaining proper alignment specs. Please read this article for tips on correctly aligning your vehicle!

Satisfaction Guarantee

60 Day Satisfaction Guarantee:

We are confident that you will love these springs. If you do not love the way they feel, you are free to return them anytime within the first 60 days for a 100% refund. Shipping & installation labor excluded.

Warranty

Limited Lifetime Warranty:

These springs are guaranteed never to sag, period.

If even one of these springs sags or becomes defective in any way, we will replace the entire set or refund your money.

If the returned spring(s) is/are determined to be defective, we will also reimburse you for the initial installation labor. We will also pay for the spring(s) to be returned to the manufacturer for thorough testing to determine what happened and why.

works with:Manual